Material Safety Data Sheet

According to ANSI Z400.1-2003
Date Printed: 04-26-2007   

Section 1 - Product and Company Information

Product Name: Flex Filler 2 (A-Side)

COMPANY IDENTIFICATION:EMERGENCY TELEPHONE NUMBER
Urethane Supply Company24 Hour Emergency Contact800-424-9300
1128 Kirk Rd.Customer Information Number800-424-9300
Rainsville, AL 35986

Section 2 - Hazards Identification

Appearance:
Odor:
Hazards of Product:
  

HMIS Rating (Scale 0 - 4)

NFPA Ratings
HEALTH  1  Health = 1
 1 
1 1
Health = 1
FIRE  1  Fire = 1Fire = 1
PHYSICAL  1  Physical = 1Reactivity = 1
PERSONAL PROTECTIONEPersonal Protection = E 


Potential Health Effects

Eye Contact:Skin: Slightly irritating. Prolonged exposure may cause allergic reaction in susceptible individuals. Eye: Mildly irritating.
Skin Absorption:Redness, allergy reaction, eczema, or skin conditions.
Inhalation:May result in irritation of nose, throat, and respiratory tract.
Ingestion:Slightly toxic. May cause irritation of throat, mouth, and gastrointestinal irritation.

Section 3 - Composition/Information on Ingredients

ComponentCAS #Amount
 
Mercaptan-terminated polymerProprietaryNA
2,4,6 Tri(dimethylaminomethyl) Phenol90-72-2NA
Aliphatic Petroleum Naphthas64742-89-81.24%
Xylene1330-20-7<.5%
Styrenic Monomer1321-74-0NA
Aromatic Hydrocarbon DiluentN/AN/A%

Section 4 - First-Aid Measures

Medical Conditions Aggravated by Exposure: Respiratory tract, skin and gastrointestinal irritation.

Section 5 - Fire Fighting Measures

Extinguishing Media: Foam, alcohol foam. CO2, Dry Chemical, Water Fog
Fire Fighting Procedures: Large fire - use self contained breathing apparatus
Unusual Fire and Explosion Hazards: None

Section 6 - Accidental Release Measures

Steps to be Taken if Material is Released or Spilled: Soak up with absorbent material and place in ventilated waste container for disposal.
Personal Precautions:
Environmental Precautions:

Section 7 - Handling and Storage

General Handling: Keep out of reach of children. Keep tightly closed. Eating, drinking, and smoking should be prohibited where there is potential exposure to toxic material. For professional use only. Not intended for sale to the general public.
Other Precautions:
Storage: Store in a cool, dry, well ventilated place. Keep tightly closedto prevent leakage and retain activity. Store away from open flames. Prevent skin and eye contact with appropriate clothing and safety glasses. Avoid inhalation of dust generated during machining after cure.

Section 8 - Exposure Controls / Personal Protection

ComponentSourceTypeValueRemarks
Aliphatic Petroleum NaphthasOSHAPEL400 ppmSTEL
Aliphatic Petroleum NaphthasACGIHTLV300 ppmTWA
Aliphatic Petroleum NaphthasOSHAPEL300 ppmTWA
XyleneACGIHTLV150 ppmSTEL
XyleneACGIHTLV100 ppmTWA
XyleneOSHAPEL100 ppmTWA
Personal Protection
Eye/Face Protection: Safety glasses with side shields.
Skin Protection: Rubber or plastic.
Respiratory Protection: When used in confined area, an approved chemical/mechanical filter, designed to remove a combination of particles and vapors,should be used.
Hygenic Measures: Wash hands before eating, smoking, or using the washroom.
Other Protection Measures: Wear impervious clothing and boots. Eye wash stations and safety showers should be available.
Engineering Controls: Provide sufficient mechanical, general, or local exhaust.

Section 9 - Physical and Chemical Properties

Appearance: Almost white, mercaptan odor
Flash Point: 65F
Upper Flammable Limit: 6.2
Lower Flammable Limit: 0.7
Boiling Point: 260
Vapor Density: Heavier than air
Specific Gravity: 1.3
Solubility in Water: Not Soluble

Section 10 - Stability and Reactivity

Stability/Instability: Stable
Conditions To Avoid: Excessive heat, open flame
Incompatible Materials: Strong oxidizing agents, epoxy resins and amines.
Hazardous Polymerization: Will Not Occur
Hazardous Decomposition Products: CO, CO2, H2S, Oxides of sulfur and nitrogen

Section 11 - Toxicological Information

Acute Toxicity
Ingestion

N/A%
Skin Absorption
N/A%
Inhalation
N/A%

Section 12 - Ecological Information

CHEMICAL FATE

Section 13 - Disposal Considerations

Disposal Method:
Dispose of in an approved chemical waste landfill or incinerate in accordance with applicable federal, state and local regulations. Do not contaminate lakes, streams, or other water supplies.
Container Disposal: Disposal must be made according to official regulations.

Section 14 - Transport Information

DOT


Section 15 - Regulatory Information

Superfund Amendments and Reathorization Act of 1986 (Emergency Planning and Community Right-to-Know Act of 1986) Sections 311 and 312

The following table list hazardous components and the regulatory lists for which they are required to be reported.
ComponentCAS #AmountSARA 313 ListedKnow to California to cause cancerPennsylvania Hazardous Substance ListMassachusetts Hazardous ListedRhode Island ListedCERCLAEPA CancerogenityIARC CancerogenityNTP CancerogenityTLV CanerogenityNIOSH CancerogenityOSHA Cancerogenity
Xylene1330-20-7<0.5%      

Section 16 - Other Information

Legend
ACGIHAmerican Conference of Governmental Hygenists
CFRCode of Federal Regulations
DFGDeutsche Forschungsgemeinschaft
HMISHazardous Materials Identification System
IARCInternational Agency for Research on Cancer
MAKMaximum Allowable Concentration (German)
MSDSMaterial Safety Data Sheet
NFPANational Fire Protection Association
NIOSHNational Institute for Occupational Safety and Health
OELOccupational Exposure Limit
RCRAResource Conservation and Recovery Act
STELShort Term Exposure Limit
TLVThreshold Limit Value
TWATime Weighted Average

This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.