Material Safety Data Sheet | |||
| According to ANSI Z400.1-2003 | |||
| Date Printed: 04-26-2007 | |||
Section 1 - Product and Company Information | |||
Product Name: PlastiFix Powder, Red | |||
| COMPANY IDENTIFICATION: | EMERGENCY TELEPHONE NUMBER | ||
| Urethane Supply Company | 24 Hour Emergency Contact | 800-424-9300 | |
| 1128 Kirk Rd. | Customer Information Number | 800-424-9300 | |
| Rainsville, AL 35986 | |||
Section 2 - Hazards Identification | |||
| Appearance: | Red powder | ||
| Odor: | |||
| Hazards of Product: | |||
| WARNING! May irritate eyes, skin and respiratory tract. | |||
HMIS Rating (Scale 0 - 4) | NFPA Ratings | ||
| HEALTH | 1 | Health = 1 |
| Health = 1 | ||||
| FIRE | 1 | Fire = 1 | Fire = 1 | |||||
| PHYSICAL | 1 | Physical = 1 | Reactivity = 0 | |||||
| PERSONAL PROTECTION | B | Personal Protection = B | ||||||
Potential Health Effects | |
| Eye Contact: | May be irritated by gross overexposure, no matter how generated. Keep dust out of eyes. |
| Skin Contact: | May be irritated by gross overexposure, no matter how generated. May cause dryness. |
| Skin Absorption: | May cause dryness. |
| Inhalation: | May irritate eyes, skin and repiratory tract. |
| Ingestion: | OSHA classifies the material as Particulates, not otherwise classified. |
Section 3 - Composition/Information on Ingredients | |||||||||||||||
| |||||||||||||||
Section 4 - First-Aid Measures |
| Eye Contact: Flush with water for 15 minutes, including under eyelids. Get medical help if discomfort persists. |
| Skin Contact: Wash with soap and water. Get medical help if discomfort persists. |
| Inhalation: Remove to fresh air. Get medical help if discomfort persists. |
| Ingestion: Rinse mouth with water. Call doctor if amount was large. |
Section 5 - Fire Fighting Measures |
| Extinguishing Media: Water, carbon dioxide, dry chemical. |
| Fire Fighting Procedures: Avoid extinguishing methods which may generate dust clouds. Water stream can diperse dust into air, producing a fire hazard and possible explosion hazard if exposed to ignition source. |
| Unusual Fire and Explosion Hazards: Polymer dust is combustible. The explosive limits of the polymer particles suspended in ir are approximately those of coal dust. |
Section 6 - Accidental Release Measures |
| Steps to be Taken if Material is Released or Spilled: Sweep up to avoid slipping hazard. Keep airborne particulates at a minimum when cleaning up spills. |
| Personal Precautions: |
| Environmental Precautions: |
Section 7 - Handling and Storage |
| General Handling: Keep out of reach of children. |
| Other Precautions: Use in well ventilated areas. Wear gloves when handling powder. |
| Storage: Store in a cool dry place. Keep container closed to prevent water absorption and contamination. |
Section 8 - Exposure Controls / Personal Protection | |||||||||||||||||||||||||
| |||||||||||||||||||||||||
Personal Protection | |||||||||||||||||||||||||
| Eye/Face Protection: Safety glasses of chemical splash goggles. | |||||||||||||||||||||||||
| Skin Protection: Impervious nitrile, if hot plastic is handled. | |||||||||||||||||||||||||
| Respiratory Protection: Use type for Particulates not otherwise classified, if needed. | |||||||||||||||||||||||||
| Hygenic Measures: Wash face and hands thoroughly with soap and water after use and before eating, drinking smokin or applying cosmetics. | |||||||||||||||||||||||||
| Other Protection Measures: Provide eyewash, safety shower and impervious clothing are recommended. | |||||||||||||||||||||||||
| Engineering Controls: Use good, local exhaust at processing equipment, including buffers, sanders, grinders and polishers. | |||||||||||||||||||||||||
Section 9 - Physical and Chemical Properties | |
| Appearance: | Fine powder. Faint odor in bulk. |
| Color: | Red |
| Flash Point: | 580F |
| Boiling Point: | NA |
| Vapor Density: | NA |
| Specific Gravity: | 1.25 |
| Solubility in Water: | Insoluble |
Section 10 - Stability and Reactivity |
| Stability/Instability: Stable |
| Conditions To Avoid: Heating above 464 F (240 C) |
| Incompatible Materials: Strong oxidizing agents. |
| Hazardous Polymerization: Will not occur |
| Hazardous Decomposition Products: Methacrylate monomer and oxides of carbon when burned. |
Section 11 - Toxicological Information |
| Acute Toxicity Ingestion 0.5-1.5% |
| Skin Absorption 0.5-1.5% |
| Inhalation 0.5-1.5% |
Section 12 - Ecological Information |
| CHEMICAL FATE |
Section 13 - Disposal Considerations |
| Disposal Method: Dispose in a landfill or incinerate according to Federal, State and Local regulations. |
| Container Disposal: Reuse of empty drums or containers is not recommended. Employees should be advised of the potential hazards, due to residual material associated with empty containers. It is our policy to discourage the reuse of empty containers and to dispose of all empty containers properly in accordance with Federal, State and Local regulations. |
Section 14 - Transport Information |
DOT |
| Proper Shipping Name: Synthetic Gum Resin Granular, NOIBN |
Section 15 - Regulatory Information |
| Superfund Amendments and Reathorization Act of 1986 (Emergency Planning and Community Right-to-Know Act of 1986) Sections 311 and 312 |
| The following table list hazardous components and the regulatory lists for which they are required to be reported. |
| Component | CAS # | Amount | SARA 313 Listed | Know to California to cause cancer | Pennsylvania Hazardous Substance List | Massachusetts Hazardous Listed | Rhode Island Listed | CERCLA | EPA Cancerogenity | IARC Cancerogenity | NTP Cancerogenity | TLV Canerogenity | NIOSH Cancerogenity | OSHA Cancerogenity |
Section 16 - Other Information |
| Legend | |||||||||||||||||||||||||||
|